New residential sprinkler systems designed for North Texas lots, soil, and water pressure.

Whether you just built in Phillips Creek Ranch or your old system is past saving, a properly designed install matters more here than almost anywhere. North Texas heat, clay soil, slope variation, and city watering restrictions all push back against the templated layouts that builder-grade installs use. We design new sprinkler systems lot-by-lot, around how your yard actually drains and how your water pressure actually behaves. Rain Bird heads and rotors, Rachio smart controllers, code-depth trenching on every line, and a full walkthrough so you understand the system before we leave.
If any of these sound familiar, it's time to call.
"Builder didn't include irrigation, or you skipped the builder upgrade for something better"
We design from scratch, accounting for new-construction soil settling, fresh sod establishment, and the long-term layout of your beds and trees. You get a system that matches the lot — not a generic template the builder would have installed.
"Controller's failed three times, heads are mixed brands, zones overlap badly"
When patching has been the answer too many times, a full replacement is usually cheaper than another year of repairs. We pull and replace the old system in place, typically in 1–2 days, without re-landscaping the whole yard.
"Brown corners, overspray on fences, and dry strips in Phillips Creek Ranch or Newman Village"
Master-planned community installs are under-zoned to keep builder costs down. We redesign zone layouts, swap to matched-precipitation nozzles, and rebalance so every square foot of your yard gets even water.
"New beds, a patio, a pool deck, or extended lawn the original install didn't account for"
We add zones, reroute existing zones, and integrate drip lines for beds without ripping out what's already working. Old system stays, new coverage gets added cleanly.
"Frisco, McKinney, Plano, or Allen require backflow devices, permits, and inspections"
We pull permits, register backflow devices with the city, and coordinate the final inspection. You never deal with the city's paperwork or scheduling — it's all part of the install.
"Want Rachio or Hydrawise integrated with your wifi and city watering schedule"
We install the controller, configure zip code, soil and slope per zone, and weather-based skip rules tied to your city's watering days. Programmed and tested before we leave.
Our primary install brand. Wide parts availability, professional-grade heads and rotors, consistent quality across the product line.
Our preferred smart controller. Weather-based scheduling, app control, and reliable integration with city watering restrictions.
We also install Hunter systems on request — Pro-C and Hydrawise controllers, MP Rotators where the application fits.
Hunter's smart-controller line. Predictive watering, leak detection, and easy installer-side configuration we set up before handoff.
Code-grade backflow preventers we install and register with the city. Tested on every install where backflow is required.
No hidden fees. No surprises. Here's exactly what's covered.
On-site design walk — measure pressure, map zones, account for slope and beds
Custom zone layout matched to lot shape and plant types
Rain Bird heads, rotors, and matched-precipitation-rate nozzles
Rachio smart controller install and configuration
Backflow preventer install with city registration where required
Code-depth trenching, professional pipe sizing, and proper valve boxes
City permits and inspection coordination
Final system walkthrough and seasonal programming
We walk your lot, measure static and dynamic water pressure, map slope and bed lines, and plan zones around how your yard actually drains — not a generic template.
Written quote with zone-by-zone breakdown. No hidden fees, no surprise change orders. You see exactly what each zone covers and what each part costs.
We pull city permits, trench to code depth, lay professional-grade pipe sized to your flow rate, set proper valve boxes, install Rain Bird heads and Rachio controller, and adjust every zone for even coverage.
We run every zone with you watching, explain the controller, show you the shutoff and backflow, and hand you a system map for future repairs.
"Above and beyond, creative solutions for a complex issue. The previous owner had built a concrete slab on top of the sprinkler piping… in due time it cracked, and now we had a big mess under our patio and house. Carlos…"
"Carlos did an amazing job with multiple items. He found and fixed an underground water leak, it was a big project and he delivered. Then we asked him back to fix sprinkler heads, bubblers, rotors, etc. Lastly, he…"
"Carlos & Nelson did an amazing job. Explained everything in perfect detail and did an amazing job fixing another person's work. Even installed a new controller as a last minute request and set the whole app up for us…"
It depends on lot size, number of zones, and water pressure. A small front-yard-only system is a different job than a full coverage install on a quarter-acre with multiple beds and a back patio. Every install starts with a free on-site design walk where we measure your pressure, map zones, and give you a written quote with zone-by-zone pricing. No phone-quote guesswork.
Most residential installs are completed in 1–2 days. A small front-yard system can wrap up in a single day; a larger full-coverage install with backflow and smart controller typically takes two. We don't leave trenches open overnight where we can avoid it.
Yes — every install includes pulling the required city permits and coordinating the final inspection. In cities that mandate it (Frisco, McKinney, Plano, Allen, and most surrounding cities), we also handle backflow device registration. You don't deal with city paperwork.
Rain Bird is our primary brand for heads, rotors, valves, and nozzles — wide parts availability and consistent quality. Rachio is our preferred smart controller for its weather-based scheduling and easy app control. Both work well for North Texas conditions and watering restrictions.
Most failures we see on builder-grade or competitor installs come down to under-zoning, mis-sized pipe, or heads spaced too far apart for actual water pressure. A great brand installed poorly will still leave dry spots and waste water. The design walk is where the install is won or lost.
Yes — we work directly with homeowners in new master-planned communities (Phillips Creek Ranch, Newman Village, Light Farms, Trinity Falls, Trails of Frisco) who either didn't get a system from the builder or want a properly designed system instead of the upgrade the builder offered.
Yes. We can remove an old, failing system and install a new one without re-landscaping the entire yard. For most installs we trench cleanly, replace heads and valves in proper boxes, and re-sod or re-seed disturbed lines. Most homeowners can't tell where we worked once the grass grows back.
Reach out and we can talk through what makes sense for your project — installation costs vary widely and we'd rather discuss specifics on-site than promise something that doesn't fit your job.
Frisco, McKinney, Allen, Plano, and the rest of North Dallas all sit on heavy black clay that shifts every freeze-thaw cycle. Most master-planned communities ship with builder-grade systems that are under-zoned and run on factory-default schedules that ignore the season. We design around what's actually here — soil, slope, pressure, and city watering rules — not a generic template.

Same-day diagnosis and repair for broken heads, leaks, and controller issues.

French drains, channel drains, and custom grading to eliminate standing water.

WiFi-enabled Rachio, Rain Bird, and Hunter controllers that cut water waste.

Full compressed-air blowout to protect your system from North Texas freezes.
Estimates available. Same-day or next-day service. No obligation.